diff --git a/INITIATION.md b/INITIATION.md
index bb598ea..71069fa 100644
--- a/INITIATION.md
+++ b/INITIATION.md
@@ -19,14 +19,6 @@ __NOTE__: This guide attempts to describe __UEFI__ in detail side by side with _
 5. [BOOTLOADER](#bootloader)  
 5.1. [LILO](#lilo)  
 6. [THE END](#the-end)  
-7. [CONFIGURATION ON CRUX](#configuration-on-crux)  
-7.1. [ENABLE CONTRIB REPO](#enable-contrib-repo)  
-7.2. [ADD EXTERNAL REPOS](#add-external-repos)  
-7.3. [INSTALL XORG](#install-xorg)  
-8. [CRUX COMMANDS](#crux-commands)  
-8.1. [AUTOMATED INSTALLATION OF PORTS](#automated-installation-of-ports)  
-8.2. [MANUAL DOWNLOAD AND INSTALLATION](#manual-download-and-installation)  
-9. [SOURCE MAGE GNU/LINUX COMMANDS](#source-mage-gnu/linu-commands)  
 
 ## START
 Boot in UEFI mode if on UEFI, BIOS if on BIOS, and select installation media.
@@ -36,11 +28,6 @@ Boot in UEFI mode if on UEFI, BIOS if on BIOS, and select installation media.
 `loadkeys <KEYMAP>`
 
 ## PARTITIONING
-Supported filesystems by bootloaders are (if on UEFI ignore this as it only supports FAT):
-* __LILO__: indifferent (anything?)
-* __SYSLINUX__: ext2, ext3, ext4, btrfs, ufs 1/2, FAT16, FAT32, iso9660, udf, NTFS
-* __GRUB Legacy__: FAT16, FAT32, minix, ext2, ext3, ext4, ReiserFS, JFS, XFS, VSTa fs, Btrfs
-* __GRUB 2__: ext2, ext3, ext4, btrfs, zfs, ufs, minix, iso9660, udf, jfs, hfs, hfs+, afs, affs, sfs, xfs, reiserfs, tar, cpio, NTFS, FAT16, FAT32
 
 In these examples we make only two partitions but you can extend this if you know how. The partitions are one root partition, later mounted to "_/mnt/drive_" with "_mkfs.<ROOT_FILESYSTEM>_" format, and one boot partition, later mounted to "_/mnt/drive/boot_" and with "_mkfs.<BOOTLOADER_FILESYSTEM>_" format unless is __UEFI__ in which case "_mkfs.vfat_" is the only format available and will be mounted to "_/mnt/drive/boot/efi_" instead.
 
@@ -164,113 +151,3 @@ In these examples we make only two partitions but you can extend this if you kno
 `shutdown -h now`  
 
 And done.
-
-## CONFIGURATION ON CRUX
-### ENABLE CONTRIB REPO
-* Enable contrib for ports  
-`cd /etc/ports`  
-`mv contrib.rsync.inactive contrib.rsync`
-* Enable contrib for prt-get  
-`nano /etc/prt-get.conf`
-* Uncomment line "_prtdir /usr/ports/contrib_"
-
-### ADD EXTERNAL REPOS
-* Download httpup/rsync file and pub file  
-`cd /etc/ports/`  
-`wget -c <URL>`
-* Add repo location to "_/etc/prt-get.conf_" (order sets precedence)  
-`nano /etc/prt-get.conf`
-* Add line "_prtdir /usr/ports/\<REPO>_"
-* Populate repo  
-`ports -u <REPO>`
-
-* Enable pre-/post-install scripts in "_/etc/prt-get.conf_" (usually safe to run repeatedly, usually used to rebuild caches and add system users when installing certain software)  
-`nano /etc/prt-get.conf`
-* Uncomment line "_runscripts yes_"
-
-* Ignore footprint mismatches due to new files (usually not a bad thing)  
-`nano /etc/pkgmk.conf`
-* Set line "_PKGMK_IGNORE_NEW="yes"_"
-
-### INSTALL XORG
-* Install a minimal set of xorg and xorg dependent tools one by one
-`prtget depinst xorg-server xorg-xf86-video-<DRIVER> xorg-font-<FONT> xkeyboard-config xorg-xinit`
-* Alternatively just install the metapackage "_xorg_"
-
-## CRUX COMMANDS
-### AUTOMATED INSTALLATION OF PORTS
-* Populate ports tree (is empty by default)  
-`ports -u`
-* Automatically download and build a package with its required dependencies ignoring signature mismatch  
-`prt-get -in depinst <PORT>`
-* Remove a package  
-`prt-get remove <PORT>`
-* Search package  
-`prt-get search <PORT>`
-* Get info from package  
-`prt-get info <PORT>`
-* Get dependency info from package  
-`prt-get depends <PORT>`
-* Update all packages  
-`prt-get sysup`
-* List all installed packages  
-`pkginfo -i`
-
-### MANUAL DOWNLOAD AND INSTALLATION
-* Go to apropriate directory for all these tasks  
-`cd to /usr/ports/<REPO>/<PORT>`
-* To download a package  
-`pkgmk -d <PORT>`
-* To install a downloaded package  
-`pkgmk -i <PORT>`
-* In case of signature mismatch  
-`pkgadd -f <PORT>`
-* To clean directory from downloaded package and build  
-`pkgadd -c <PORT>`
-* To remove installed package  
-`pkgrm <PORT>`
-
-## SOURCE MAGE GNU/LINUX COMMANDS
-* To get a manual  
-`cast smgl-setup`  
-`man smgl-setup`
-* To change general things like the color scheme  
-`sorcery`
-* To update the package manager  
-`sorcery update`
-* To update the package list  
-`scribe update`
-* To check for any changes in the architecture specs  
-`cast smgl-archspecs`
-* To rebuild everything from source  
-`sorcery rebuild`
-* To recompile the kernel  
-`cast -r linux`
-* To get a list of spells needing upgrade  
-`sorcery -q`
-* To upgrade the spells themselves known to be available for upgrade  
-`cast --queue`
-* To check for broken installations  
-`cleanse --fix`
-* After casting new spells you need this to have apropos, man -k, and whatis  
-` makewhatis`
-* To install new packages  
-`cast <spell>`
-* To update an existing package  
-`cast <spell>`
-* To search for packages  
-`gaze search <spell>`
-* To search by package name  
-`gaze search -name  <spell>`
-* To list installed packages  
-`gaze installed`
-* To remove a spell  
-`dispel <spell>`
-* To delete completely a package  
-`dispel --nosustain <spell>`
-* To list repositories  
-`scribe index`
-* To add a repository  
-`scribe add <grimoire>`
-* To remove a repository  
-`scribe remove <grimoire>`