Update Initiation Rite.md

Initiation Rite.md

@@ -21,117 +21,79 @@ Supported filesystems by bootloaders are (if on UEFI ignore this as it only supp
 In these examples we make only two partitions but you can extend this if you know how. The partitions are one root partition, later mounted to /mnt/drive format with mkfs.<ROOT_FILESYSTEM>, and one boot partition, later mounted to /mnt/drive/boot and format with mkfs.<BOOTLOADER_FILESYSTEM> unless is UEFI in which case mkfs.vfat is the only format available and will be mounted to /mnt/drive/boot/efi.
 
 # Use parted
-{{{
+`parted /dev/sda`
-parted /dev/sda
-}}}
 # Inside parted, if on UEFI label the disk "gpt", but if on BIOS label it "msdos"
-{{{
+`mklabel <LABEL>
-mklabel <LABEL>
 unit mb
 mkpart primary 0g 128
 mkpart primary 128 -1
 toggle 1 boot
 p free
-quit
+quit`
-}}}
 
 # Make boot filesystem according to supported bootloader or just "mkfs.vfat" if on UEFI
-{{{
+`mkfs.<BOOTLOADER_FILESYSTEM> /dev/sda1`
-mkfs.<BOOTLOADER_FILESYSTEM> /dev/sda1
-}}}
 # Make root filesystem according to your personal preference
-{{{
+`mkfs.<ROOT_FILESYSTEM> /dev/sda2
-mkfs.<ROOT_FILESYSTEM> /dev/sda2
 mkdir /mnt/drive
-mount /dev/sda2 /mnt/drive
+mount /dev/sda2 /mnt/drive`
-}}}
 # If on BIOS
-{{{
+`mkdir /mnt/drive/boot
-mkdir /mnt/drive/boot
+mount /dev/sda1 /mnt/drive/boot`
-mount /dev/sda1 /mnt/drive/boot
-}}}
 # If on UEFI
-{{{
+`mkdir -p /mnt/drive/boot/efi
-mkdir -p /mnt/drive/boot/efi
 mount /dev/sda1 /mnt/drive/boot/efi
 cd /mnt/drive
 mount --bind /dev /mnt/drive/dev
 mount --bind /sys /mnt/drive/sys
 mount -t proc none /mnt/drive/proc
-mount -t devpts none /mnt/drive/dev/pts
+mount -t devpts none /mnt/drive/dev/pts`
-}}}
 
 == SETUP
 
 # On CRUX run setup, and if on UEFI select on setup grub2-efi (if using GRUB 2), efibootmgr, and elfutils from opt (only select core, and say yes when you're asked if you want to select individual packages). And if you are not using LILO de-select it from core.
 # On Source Mage GNU/Linux get the tarball
-{{{
+`cd /mnt/drive
-cd /mnt/drive
 wget -c "http://download.sourcemage.org/image/official/smgl-stable-<version>-basesystem-x86_64.<compression>"
-tar xvf smgl-stable-<version>-basesystem-x86_64.<compression>
+tar xvf smgl-stable-<version>-basesystem-x86_64.<compression>`
-}}}
 
 # Chroot specifying Bash in case live media has another shell
-{{{
+`chroot /mnt/drive /bin/bash`
-chroot /mnt/drive /bin/bash
-}}}
  
 # Change root password in chroot (TEST IF YOUR KEYBOARD HAS ALL THE CORRECT MAPPINGS before you change the password)
-{{{
+`passwd root`
-passwd root
-}}}
  
 # Change the network interfaces
 # On CRUX modify /etc/rc.d/net with the rules you want (IP, gateway, domain, etc)
-{{{
+`nano /etc/rc.d/net`
-nano /etc/rc.d/net
-}}}
 # On Source Mage GNU/Linux add preferred interfaces for example
-nano /etc/network/interfaces
+`nano /etc/network/interfaces`
-{{{
+`auto eth0
-auto eth0
 allow-hotplug eth0
-iface eth0 inet dhcp
+iface eth0 inet dhcp`
-}}}
  
 # On /etc/resolv.conf.head set your preferred DNS provider (this example is from OpenNIC)
-{{{
+`nano /etc/resolv.conf.head`
-nano /etc/resolv.conf.head
+`nameserver 193.41.79.236`
-}}}
-{{{
-nameserver 193.41.79.236
-}}}
 # Or copy the resolv.conf file from /etc to /mnt/etc BEFORE chrooting
 
 # Change the fstab with appropriate filesystems
-{{{
+`nano /etc/fstab`
-nano /etc/fstab
+`/dev/sda1    /boot    <BOOTLOADER_FILESYSTEM>    defaults    0 2
-}}}
+/dev/sda2    /    <ROOT_FILESYSTEM>    noatime    0 1`
-{{{
-/dev/sda1    /boot    <BOOTLOADER_FILESYSTEM>    defaults    0 2
-/dev/sda2    /    <ROOT_FILESYSTEM>    noatime    0 1
-}}}
 # On CRUX uncomment the lines referring to devpts, tmp, and shm as some programs require it (Firefox), also USB and or cdrom if using those
 # If on UEFI replace /boot with /boot/efi
 
 # On CRUX change the font, keyboard, timezone, hostname and services
-{{{
+`ls /usr/share/kbd/keymaps/
-ls /usr/share/kbd/keymaps/
+nano /etc/rc.conf`
-nano /etc/rc.conf
-}}}
 # On Source Mage GNU/Linux change the keymaps
-{{{
+`ls /usr/share/keymaps/i386/qwerty
-ls /usr/share/keymaps/i386/qwerty
+nano /etc/sysconfig/keymap`
-nano /etc/sysconfig/keymap
-}}}
 # On CRUX generate locales (change interface language)
-{{{
+`localedef -i <LOCALE> -f ISO-<CODE> <LOCALE>`
-localedef -i <LOCALE> -f ISO-<CODE> <LOCALE>
-}}}
 # On Source Mage GNU/Linux generate locales (change interface language)
-{{{
+`cast -r locale`
-cast -r locale
-}}}
 
 
 == BOOTLOADER
@@ -141,18 +103,15 @@ cast -r locale
 * All bootloader examples have included other OS inside what is called "stanzas".
 * FreeDOS and Windows stanzas are OPTIONAL.
 * If dualbooting with Windows remember that it likes to be in the first partition.
-* If on UEFI check if module is loaded by issuing {{{modprobe efivars}}}.
+* If on UEFI check if module is loaded by issuing `modprobe efivars`.
-* On CRUX do {{{prt-get remove lilo}}} if you dont use LILO.
+* On CRUX do `prt-get remove lilo` if you dont use LILO.
-* On Source Mage GNU/Linux do {{{cast <BOOTLOADER>}}} to install the preferred bootloader.
+* On Source Mage GNU/Linux do `cast <BOOTLOADER>` to install the preferred bootloader.
 
 === LILO
 # If on UEFI use elilo and change names to /etc/elilo.conf instead of /etc/lilo.conf and elilo instead of lilo in commands
-{{{
+`nano /etc/lilo.conf`
-nano /etc/lilo.conf
-}}}
 # Inserting password=<PASSWORD> inside an OS stanza will protect with a password the that OS, but inserting password=<PASSWORD> just before the stanzas will protect with a password the bootloader instead (notice the space inside stanzas)
-{{{
+`boot = /dev/sda
-boot = /dev/sda
 image = /boot/vmlinuz
      Label = CRUX
      root = /dev/sda<PARTITION_NUMBER_OF_DISTRO>
@@ -161,44 +120,30 @@ other = /dev/sda<PARTITION_NUMBER_OF_FREEDOS>
      Label = FreeDos
 other = /dev/sda<PARTITION_NUMBER_OF_WINDOWS>
      table = /dev/sda
-     Label = Windows7
+     Label = Windows7`
-}}}
+`lilo -A /dev/sda 1
-{{{
+lilo`
-lilo -A /dev/sda 1
-lilo
-}}}
 # In case you used a password prevent anyone but root of reading the config file
-{{{
+`chmod 600 /etc/lilo.conf`
-chmod 600 /etc/lilo.conf
-}}}
 
 === SYSLINUX
 # If on BIOS make directory and copy files accordingly
-{{{
+`mkdir -p /boot/syslinux
-mkdir -p /boot/syslinux
+cp /usr/lib/syslinux/bios/*.c32 /boot/syslinux/`
-cp /usr/lib/syslinux/bios/*.c32 /boot/syslinux/
-}}}
 # If on UEFI make directory and copy files accordingly
-{{{
+`mkdir -p /boot/efi/EFI/syslinux
-mkdir -p /boot/efi/EFI/syslinux
+cp -r /usr/lib/syslinux/efi64/* /boot/efi/EFI/syslinux/`
-cp -r /usr/lib/syslinux/efi64/* /boot/efi/EFI/syslinux/
-}}}
 # If on BIOS setup boot entry
-{{{
+`umount /dev/sda1
-umount /dev/sda1
 syslinux --directory syslinux --install /dev/sda1
-mount /dev/sda1 /boot
+mount /dev/sda1 /boot`
-}}}
 # If on UEFI setup boot entry using efibootmgr
-{{{
+`umount /dev/sda1
-umount /dev/sda1
 efibootmgr -c -d /dev/sda -p 1 -l /boot/efi/EFI/syslinux/syslinux.efi -L Syslinux
-mount /dev/sda1 /boot/efi
+mount /dev/sda1 /boot/efi`
-}}}
 # Edit /boot/syslinux/syslinux.cfg if on BIOS or /boot/efi/EFI/syslinux/syslinux.cfg if on UEFI
 # splash.png is the splash screen image located in /boot/syslinux/ if on BIOS or /boot/efi/EFI/syslinux/ if on UEFI
-{{{
+`PROMPT 1
-PROMPT 1
 TIMEOUT 50
 MENU BACKGROUND splash.png
 DEFAULT CRUX
@@ -213,26 +158,18 @@ LABEL FreeDOS
 LABEL Windows7
       MENU LABEL Windows7
       KERNEL chain.c32
-      APPEND sda <PARTITION_NUMBER_OF_WINDOWS>
+      APPEND sda <PARTITION_NUMBER_OF_WINDOWS>`
-}}}
 
 === GRUB Legacy
 # If on BIOS setup boot entry (boot partition must be mounted)
-{{{
+`mount /dev/sda1 /boot
-mount /dev/sda1 /boot
+grub-install /dev/sda`
-grub-install /dev/sda
-}}}
 # If on UEFI setup boot entry (boot partition must be mounted)
-{{{
+`mount /dev/sda1 /boot/efi
-mount /dev/sda1 /boot/efi
+grub-install /boot/efi`
-grub-install /boot/efi
-}}}
 #Edit configuration file
-{{{
+`nano /boot/grub/menu.lst`
-nano /boot/grub/menu.lst
+`default=0
-}}}
-{{{
-default=0
 timeout=10
 splashimage=(hd0,0)/grub/splash.xpm.gz
 #hiddenmenu
@@ -250,26 +187,18 @@ title FreeDOS
         initrd (hd0,<PARTITION_NUMBER_OF_FREEDOS>)/fdboot.img
 title Windows 7
         root (hd0,<PARTITION_NUMBER_OF_WINDOWS>)
-        chainloader /EFI/Microsoft/Boot/bootmgfw.efi
+        chainloader /EFI/Microsoft/Boot/bootmgfw.efi`
-}}}
 
 === GRUB 2
 # If on BIOS setup boot entry (boot partition must be mounted)
-{{{
+`mount /dev/sda1 /boot
-mount /dev/sda1 /boot
+grub-install /dev/sda`
-grub-install /dev/sda
-}}}
 # If on UEFI setup boot entry (boot partition must be mounted)
-{{{
+`mount /dev/sda1 /boot/efi
-mount /dev/sda1 /boot/efi
+grub-install /boot/efi`
-grub-install /boot/efi
-}}}
 # If Grub does not detect your OS run "os-prober" followed by "update-grub", or add the OS manually to the Grub config file
-{{{
+`nano /etc/grub.d/40_custom`
-nano /etc/grub.d/40_custom
+`menuentry "FreeDOS" {
-}}}
-{{{
-menuentry "FreeDOS" {
 set root='(hd0,msdos2)'
 linux16 /memdisk
 initrd16 /fdboot.img
@@ -283,9 +212,6 @@ insmod ntldr
 search --fs-uuid --no-floppy --set=root 3482FBC382FB879E
 chainloader +1
 ntldr /bootmgr
-}
+}`
-}}}
 # Update config file
-{{{
+`grub-mkconfig -o /boot/grub/grub.cfg`
-grub-mkconfig -o /boot/grub/grub.cfg
-}}}