mayfrost-guides/NETWORKING.md

NETWORKING

TOC

1. SETUP
   1.1 /etc/network/interfaces
   1.2. WiFi
2. FIREWALL
   2.1. ufw
   2.2. iptables
3. SSH
   3.1. CLIENT
   3.2. SERVER
4. TROUBLESHOOTING
   4.1. tcpdump
   4.2. netstat
   4.3. traceroute
   4.4. nmap

SETUP

/etc/network/interfaces

# use last 8 octets for hosts
255.255.255.0

WiFi

Use WiFi without a separate network manager with this simple guide. Needs "dhcpcd" or "dhcpclient", "net-tools" or "iproute2", "wpa_supplicant", and the WiFi drivers for your wireless card (like "iwlwifi" and its "ucode"), which in part can be installed from a package usually named "linux-firmware", but they may not be complete (this provides "ucode" but not "iwlwifi").
NOTE: The "<DEVICE_NAME>" can be either "wlp3s0" or "wlan0". Change accordingly the following commands to suit your needs.

• Create the configuration file (as "root", not "sudo"):
  wpa_passphrase <NETWORK_NAME> <PASSWORD> > /etc/wpa_supplicant.conf
• Delete non hashed password from "/etc/wpa_supplicant.conf", but not the hashed one.

Each time you need to connect type the following command (as "root" or with "sudo"):

• EXAMPLE 1: With "net-tools" and "dhcpcd":

ifconfig <DEVICE_NAME> down
ifconfig <DEVICE_NAME> up
wpa_supplicant -B -i<DEVICE_NAME> -c /etc/wpa_supplicant.conf -Dwext
dhcpcd <DEVICE_NAME>  

• EXAMPLE 2: With "iproute2" and "dhclient":

ip link set <DEVICE_NAME> down
ip link set <DEVICE_NAME> up
wpa_supplicant -B -i<DEVICE_NAME> -c /etc/wpa_supplicant.conf -Dwext
dhclient <DEVICE_NAME>  

You can save either example in a script to activate the Wi-Fi whenever you want.

• Note: As an educational tip, the name of a network is also called "SSID" in other places.

FIREWALL

ufw

• Show status
  sudo ufw status
• Enable firewall
  sudo ufw enable
• Disable firewall
  sudo ufw disable
• Deny all by default
  sudo ufw default deny
• Allow all by default
  sudo ufw default allow
• Allow everything for specific port by default
  sudo ufw allow PORT_NUMBER
• Delete a rule
  sudo ufw delete allow PORT_NUMBER
• Allow everything for a specific address
  sudo ufw allow from IP_ADDRESS
• Allow a specific port for a specific address
  sudo ufw allow from IP_ADDRESS to any port PORT_NUMBER

iptables

• To list all rules:
  iptables -L
• To flush all rules (reset to blank slate):
  iptables -F
• To flush an specific rule:
  iptables -F <THE_RULE_TO_FLUSH>

BASICS

• The rules are read in the order you give them and also their flags:
  -A: appends to previous list of rules.
  -I: inserts to previous list of rules.

• The rules are followed according to their type which is a chain. The three types of chains are:
  INPUT: Comes from outside the firewall (commonly from another computer).
  OUTPUT: Comes from behind the firewall (commonly from the same computer).
  FORWARD: Goes to a third computer.

• To select the interface (can be eth0, lo, wlan0, etc.):
  --in-interface <INTERFACE>

• or also:
  -i <INTERFACE>

• To make the rule match all but the requested interface add an exclamation between the interface flag and the interface name:
  -i ! <INTERFACE>

• To select source of connection:
  -s <SOURCE_IP>

• To select the protocol (can be tcp, udp, etc.):
  -p <PROTOCOL>

• To select the port:
  --dport <PORT>

• Match packet rules by state (can be used instead of ports):
  -m state

• Types of state (ESTABLISHED, RELATED, etc.), more than one can be selected by using a comman with no spaces, for example:
  --state ESTABLISHED,RELATED

• Match packet rules by IP range (can be used instead of ports):
  -m iprange

• To choose a range set the start IP and the end IP separated by a dash:
  --src-range <FIRST_IP>-<LAST_IP>

• The action to enforce (ACCEPT, DROP, etc.):
  -j <ACTION>

GENERAL POLICIES

• Let pass all connections from inside the firewall:
  iptables -P OUTPUT ACCEPT

• Drop all incoming connections by default:
  iptables -P INPUT DROP

• Drop all forwarding connections by default:
  iptables -P FORWARD DROP

• Allow all packets from loopback (your computer):
  iptables -A INPUT --in-interface lo -j ACCEPT

• Allow connections from outisde to view your server:
  iptables -A INPUT -p tcp --dport <SERVER_PORT> -j ACCEPT

• Allow connections to your computer through SSH (assuming the SSH server is running in port 22):
  iptables -A INPUT -p tcp --dport 22 -j ACCEPT

• Allow SSH only from local IP using IP range (to be used instead of the above):
  iptables -A INPUT -m iprange --src-range 192.168.1.1-192.168.1.254 -p tcp --dport 22 -j ACCEPT

• Allow connections to receive a response from the same port, for the sake of the two-way connection as in the case of web browsers:
  iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT

• Drop spoofed packets simulating as coming from the same computer:
  iptables -A INPUT --in-interface ! lo --source 127.0.0.0/8 -j DROP

CUSTOM POLICIES

• To create a custom chain:
  -N <ANY_NAME>

• Declaring the <ANY_NAME> chain will add the deployment of rules with this chain name where this chain is called:
  iptables -A INPUT -j <ANY_NAME>

• Using the chain <ANY_NAME> for connections from outisde to your server:
  iptables -A <ANY_NAME> -p tcp --dport <SERVER_PORT> -j ACCEPT

• Using the chain <ANY_NAME> for connections to the SSH server:
  iptables -A <ANY_NAME> -p tcp --dport 22 -j ACCEPT

PORT REDIRECTION

• Redirect port 80 to port 8080 using the NAT table:
  iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 8080

SSH

CLIENT

• login to remote host
  ssh ADDRESS
• login to remote host as user USER
  ssh USER@ADDRESS

SERVER

• set ssh server configuration in /etc/ssh/sshd_config

Port 22 # default port is 22, can be changed
PermitRootLogin without-password # change "without-password" to "no" to forbid root login
AllowUsers USER_NAME # by allowing a specific user it restricts the others

• restart "ssh" service to activate changes

TROUBLESHOOTING

tcpdump

• dump all
  sudo tcpdump
• dump 5 packets
  sudo tcpdump -c 5
• dump in ASCii format
  sudo tcpdump -A
• dump in hexadecimal format
  sudo tcpdump -xx
• dump from an specific interface
  sudo tcpdump -i INTERFACE_NAME
• dump from a specific port
  sudo tcpdump port PORT_NUMBER
• dump 5 packets in hexadecimal from an specific interface and a specific port
  sudo tcpdump -c 5 -xx -i INTERFACE port PORT_NUMBER

netstat

• show routing table, including gateway
  netstat -nr
• show all ports
  netstat -tulpn
• show network usage of devices
  netstat -i
• show active connections
  netstat -ta
• show active connections, but show ip addresses instead
  netstat -tan

traceroute

• show which route your connection takes between your computer to the destination
  traceroute WEBNAME_OR_IP

nmap

• scan a specific ip address (including devices)
  nmap IP_NUMBER
• scan a specific website
  nmap WEBSITE_NAME
• scan a specific ip address (including devices) with more information
  nmap -v IP_NUMBER
• scan two ip address (including devices), 192.168.0.1 and 192.168.0.54
  nmap 192.168.0.1,54
• scan a range of ip address (including devices), from 192.168.0.1 to 192.168.0.100
  nmap 192.168.0.1-100
• scan all ip address (including devices) from network 192.168.0.0
  nmap 192.168.0.*
• scan address from a file
  nmap -il <FILE>
• scan address and identify OS and running services
  nmap -A IP_NUMBER
• check if target is up
  nmap -sP IP_NUMBER
• check reason for services states
  nmap --reason IP_NUMBER
• show host interfaces
  nmap --iflist IP_NUMBER