mirror of
https://github.com/mayfrost/guides.git
synced 2024-11-28 02:11:46 +00:00
130 lines
4.1 KiB
Markdown
130 lines
4.1 KiB
Markdown
# NETWORKING
|
|
|
|
## WiFi
|
|
|
|
Use WiFi without a separate network manager with this simple guide. Needs "_dhcpcd_" or "_dhcpclient_", "_net-tools_" or "_iproute2_", "_wpa\_supplicant_", and the WiFi drivers for your wireless card (like "_iwlwifi_" and its "_ucode_"), which in part can be installed from a package usually named "_linux-firmware_", but they may not be complete (this provides "_ucode_" but not "_iwlwifi_").
|
|
__NOTE__: The "_<DEVICE_NAME>_" can be either "_wlp3s0_" or "_wlan0_". Change accordingly the following commands to suit your needs.
|
|
|
|
* Create the configuration file (as "_root_", not "_sudo_"):
|
|
`wpa_passphrase <NETWORK_NAME> <PASSWORD> > /etc/wpa_supplicant.conf`
|
|
* Delete non hashed password from "_/etc/wpa_supplicant.conf_", but not the hashed one.
|
|
|
|
Each time you need to connect type the following command (as "_root_" or with "_sudo_"):
|
|
|
|
* __EXAMPLE 1__: With "_net-tools_" and "_dhcpcd_":
|
|
```
|
|
ifconfig <DEVICE_NAME> down
|
|
ifconfig <DEVICE_NAME> up
|
|
wpa_supplicant -B -i<DEVICE_NAME> -c /etc/wpa_supplicant.conf -Dwext
|
|
dhcpcd <DEVICE_NAME>
|
|
```
|
|
|
|
* __EXAMPLE 2__: With "_iproute2_" and "_dhclient_":
|
|
```
|
|
ip link set <DEVICE_NAME> down
|
|
ip link set <DEVICE_NAME> up
|
|
wpa_supplicant -B -i<DEVICE_NAME> -c /etc/wpa_supplicant.conf -Dwext
|
|
dhclient <DEVICE_NAME>
|
|
```
|
|
|
|
You can save either example in a script to activate the Wi-Fi whenever you want.
|
|
|
|
* Note: As an educational tip, the name of a network is also called "_SSID_" in other places.
|
|
|
|
## Next
|
|
|
|
### ufw
|
|
* Show status
|
|
`sudo ufw status`
|
|
* Enable firewall
|
|
`sudo ufw enable`
|
|
* Disable firewall
|
|
`sudo ufw disable`
|
|
* Deny all by default
|
|
`sudo ufw default deny`
|
|
* Allow all by default
|
|
`sudo ufw default allow`
|
|
* Allow everything for specific port by default
|
|
`sudo ufw allow PORT_NUMBER`
|
|
* Delete a rule
|
|
`sudo ufw delete allow PORT_NUMBER`
|
|
* Allow everything for a specific address
|
|
`sudo ufw allow from IP_ADDRESS`
|
|
* Allow a specific port for a specific address
|
|
`sudo ufw allow from IP_ADDRESS to any port PORT_NUMBER`
|
|
|
|
### tcpdump
|
|
* dump all
|
|
`sudo tcpdump`
|
|
* dump 5 packets
|
|
`sudo tcpdump -c 5`
|
|
* dump in ASCii format
|
|
`sudo tcpdump -A`
|
|
* dump in hexadecimal format
|
|
`sudo tcpdump -xx`
|
|
* dump from an specific interface
|
|
`sudo tcpdump -i INTERFACE_NAME`
|
|
* dump from a specific port
|
|
`sudo tcpdump port PORT_NUMBER`
|
|
* dump 5 packets in hexadecimal from an specific interface and a specific port
|
|
`sudo tcpdump -c 5 -xx -i INTERFACE port PORT_NUMBER`
|
|
|
|
### netstat
|
|
* show routing table, including gateway
|
|
`netstat -nr`
|
|
* show all ports
|
|
`netstat -tulpn`
|
|
* show network usage of devices
|
|
`netstat -i`
|
|
* show active connections
|
|
`netstat -ta`
|
|
* show active connections, but show ip addresses instead
|
|
`netstat -tan`
|
|
|
|
### traceroute
|
|
* show which route your connection takes between your computer to the destination
|
|
`traceroute WEBNAME_OR_IP`
|
|
|
|
### nmap
|
|
* scan a specific ip address (including devices)
|
|
`nmap IP_NUMBER`
|
|
* scan a specific website
|
|
`nmap WEBSITE_NAME`
|
|
* scan a specific ip address (including devices) with more information
|
|
`nmap -v IP_NUMBER`
|
|
* scan two ip address (including devices), 192.168.0.1 and 192.168.0.54
|
|
`nmap 192.168.0.1,54`
|
|
* scan a range of ip address (including devices), from 192.168.0.1 to 192.168.0.100
|
|
`nmap 192.168.0.1-100`
|
|
* scan all ip address (including devices) from network 192.168.0.0
|
|
`nmap 192.168.0.*`
|
|
* scan address from a file
|
|
`nmap -il <FILE>`
|
|
* scan address and identify OS and running services
|
|
`nmap -A IP_NUMBER`
|
|
* check if target is up
|
|
`nmap -sP IP_NUMBER`
|
|
* check reason for services states
|
|
`nmap --reason IP_NUMBER`
|
|
* show host interfaces
|
|
`nmap --iflist IP_NUMBER`
|
|
|
|
### SSH
|
|
* login to remote host
|
|
`ssh ADDRESS`
|
|
* login to remote host as user USER
|
|
`ssh USER@ADDRESS`
|
|
* set ssh server configuration in /etc/ssh/sshd_config
|
|
```
|
|
Port 22 # default port is 22, can be changed
|
|
PermitRootLogin without-password # change "without-password" to "no" to forbid root login
|
|
AllowUsers USER_NAME # by allowing a specific user it restricts the others
|
|
```
|
|
* restart "ssh" service to activate changes
|
|
|
|
## /etc/network/interfaces
|
|
```
|
|
# use last 8 octets for hosts
|
|
255.255.255.0
|
|
```
|