mayfrost-guides/BOOTLOADER.md

BOOTLOADER

• The drive where bootloaders and OSes are installed on these examples is "/dev/sda", but could be anywhere.
• The bootloader installation IS inside chroot AND with drives mounted, so this guide assumes you are inside "/mnt/drive".
• "<PARTITION_NUMBER_OF_DISTRO>", "<PARTITION_NUMBER_OF_FREEDOS>" and "<PARTITION_NUMBER_OF_WINDOWS>" are just the numbers of partitions.
• The "vmlinuz" file makes reference to the kernel image, you can rename it or simlink to it in all cases, the only rule is you have to make sure the name is referenced correctly in the bootloader. By default it can have names like "vmlinuz-linux", "vmlinuz-<KERNEL_VERSION>" and so on. The same with "initramfs.img", it can be "initramfs-<KERNEL_VERSION>.img" and such.
• All bootloader examples have included other OS inside what is called "stanzas".
• FreeDOS and Windows stanzas are OPTIONAL.
• If dualbooting with Windows remember that it likes to be in the first partition.
• If on UEFI check if module is loaded by issuing "modprobe efivars".
• On CRUX do "prt-get remove lilo" if you dont use LILO.
• On Source Mage GNU/Linux do "cast <BOOTLOADER>" to install the preferred bootloader.

Supported filesystems by bootloaders, they will boot if they /boot partition has a supported filesystem. If on UEFI ignore this as it only supports FAT.:

• LILO: indifferent (anything?)
• SYSLINUX: ext2, ext3, ext4, btrfs, ufs 1/2, FAT16, FAT32, iso9660, udf, NTFS.
• GRUB Legacy: FAT16, FAT32, minix, ext2, ext3, ext4, ReiserFS, JFS, XFS, VSTa fs, Btrfs.
• GRUB 2: ext2, ext3, ext4, btrfs, zfs, ufs, minix, iso9660, udf, jfs, hfs, hfs+, afs, affs, sfs, xfs, reiserfs, tar, cpio, NTFS, FAT16, FAT32.

LILO

• If on UEFI use elilo and change names to "/etc/elilo.conf" instead of "/etc/lilo.conf" and "elilo" instead of "lilo" in commands.
  nano /etc/lilo.conf
• Inserting "password=<PASSWORD>" inside an OS stanza will protect with a password that OS, but inserting "password=<PASSWORD>" just before the stanzas and outside any of them will protect with a password the bootloader itself (notice the space inside stanzas)
  boot = /dev/sda
image = /boot/vmlinuz
Label = <DISTRO_NAME>
root = /dev/sda<PARTITION_NUMBER_OF_DISTRO>
other = /dev/sda<PARTITION_NUMBER_OF_FREEDOS>
table = /dev/sda
Label = FreeDOS
other = /dev/sda<PARTITION_NUMBER_OF_WINDOWS>
table = /dev/sda
Label = Windows7
• Set boot entry
  lilo -A /dev/sda 1
lilo
• Prevent anyone but root of reading the config file (in case you used a password)
  chmod 600 /etc/lilo.conf

SYSLINUX

• If on BIOS make directory and copy files accordingly
  mkdir -p /boot/syslinux
cp /usr/lib/syslinux/bios/*.c32 /boot/syslinux/
• If on UEFI make directory and copy files accordingly
  mkdir -p /boot/efi/EFI/syslinux
cp -r /usr/lib/syslinux/efi64/* /boot/efi/EFI/syslinux/
• If on BIOS set boot entry
  umount /dev/sda1
syslinux --directory syslinux --install /dev/sda1
mount /dev/sda1 /boot
• If on UEFI set boot entry using "efibootmgr"
  umount /dev/sda1
efibootmgr -c -d /dev/sda -p 1 -l /boot/efi/EFI/syslinux/syslinux.efi -L Syslinux
mount /dev/sda1 /boot/efi
• Edit "/boot/syslinux/syslinux.cfg" if on BIOS or "/boot/efi/EFI/syslinux/syslinux.cfg" if on UEFI
• "splash.png" is the splash screen image located in "/boot/syslinux/" if on BIOS or "/boot/efi/EFI/syslinux/" if on UEFI
  PROMPT 1
TIMEOUT 50
MENU BACKGROUND splash.png
DEFAULT <DISTRO_NAME>
LABEL <DISTRO_NAME>
MENU LABEL <DISTRO_NAME>
LINUX /boot/vmlinuz
INITRD /boot/initramfs.img
LABEL FreeDOS
MENU LABEL FreeDOS
KERNEL chain.c32
APPEND sda <PARTITION_NUMBER_OF_FREEDOS>
LABEL Windows7
MENU LABEL Windows7
KERNEL chain.c32
APPEND sda <PARTITION_NUMBER_OF_WINDOWS>

GRUB Legacy

• If on BIOS set boot entry (boot partition must be mounted)
  mount /dev/sda1 /boot
grub-install /dev/sda
• If on UEFI set boot entry (boot partition must be mounted)
  mount /dev/sda1 /boot/efi
  grub-install /boot/efi`
• Edit configuration file "/boot/grub/menu.lst"
  default=0
timeout=10
splashimage=(hd0,0)/grub/splash.xpm.gz
#hiddenmenu
title <DISTRO_NAME> (<KERNEL_VERSION>)
root (hd0,<PARTITION_NUMBER_OF_DISTRO>)
kernel /vmlinuz-<KERNEL_VERSION> ro root=/dev/sda5 rhgb quiet
initrd /initramfs-<KERNEL_VERSION>.img
title <DISTRO_NAME_alternative_kernel> (<ANOTHER_KERNEL_VERSION>)
root (hd0,<PARTITION_NUMBER_OF_DISTRO>)
kernel /vmlinuz-<ANOTHER_KERNEL_VERSION> ro root=/dev/sda5 rhgb quiet
initrd /initramfs-<ANOTHER_KERNEL_VERSION>.img
title FreeDOS
root (hd0,<PARTITION_NUMBER_OF_FREEDOS>)
kernel /memdisk
initrd (hd0,<PARTITION_NUMBER_OF_FREEDOS>)/fdboot.img
title Windows 7
root (hd0,<PARTITION_NUMBER_OF_WINDOWS>)
chainloader /EFI/Microsoft/Boot/bootmgfw.efi

GRUB 2

• If on BIOS set boot entry (boot partition must be mounted)
  mount /dev/sda1 /boot
grub-install /dev/sda
• If on UEFI set boot entry (boot partition must be mounted)
  mount /dev/sda1 /boot/efi
grub-install /boot/efi
• If Grub does not detect your OS run "os-prober" followed by "update-grub"
• Or add the OS manually to the Grub config file "/etc/grub.d/40_custom"
  menuentry "FreeDOS" {
set root='(hd0,msdos2)'
linux16 /memdisk
initrd16 /fdboot.img
chainloader +1
}
menuentry "Windows 7" {
insmod part_msdos
insmod ntfs
insmod search_fs_uuid
insmod ntldr
search --fs-uuid --no-floppy --set=root 3482FBC382FB879E
chainloader +1
ntldr /bootmgr
}
• Update config file
  grub-mkconfig -o /boot/grub/grub.cfg