mirror of
https://github.com/mayfrost/guides.git
synced 2024-11-01 07:26:04 +00:00
144 lines
4.3 KiB
Markdown
144 lines
4.3 KiB
Markdown
# CROSS-COMPILING
|
|
Installing a distro for ARM. The distro is CRUX, the target is an Odroid C2.
|
|
|
|
|
|
## TOC
|
|
1. [CROSS COMPILATION TOOLS](#cross-compilation-tools)
|
|
2. [PARTITIONING](#partitioning)
|
|
3. [BOOTLOADER](#bootloader)
|
|
4. [BOOT PARTITION](#boot-partition)
|
|
5. [ROOT PARTITION](#root-partition)
|
|
6. [COMPILING](#compiling)
|
|
|
|
|
|
## CROSS COMPILATION TOOLS
|
|
Installing cross GCC compilation tools (for the X86 machine, not target ARM). Includes binutils.
|
|
|
|
* OPTION 1: from repository (Devuan example)
|
|
`sudo apt-get install gcc-arm-none-eabi`
|
|
|
|
* OPTION 2: proportioned by odroid
|
|
```
|
|
wget http://odroid.in/guides/ubuntu-lfs/arm-unknown-linux-gnueabi.tar.xz
|
|
tar -Jxf arm-unknown-linux-gnueabi.tar.xz
|
|
```
|
|
|
|
Name of "_CROSS_COMPILE_" variable will change depending on the choosen option. This guide assumes from repository and therefore will equal to "_CROSS\_COMPILE=arm-none-eabi-_"
|
|
|
|
|
|
## PARTITIONING
|
|
* clear the section for the bootloader
|
|
`dd if=/dev/zero of=/dev/mmcblk0 bs=1M count=8`
|
|
* enter fdisk
|
|
`fdisk /dev/mmcblk0`
|
|
* help
|
|
`m`
|
|
* create new MBR partition table
|
|
`o`
|
|
* create boot partition
|
|
`n`
|
|
* make primary partition
|
|
`p`
|
|
* choose partition number
|
|
`1`
|
|
* assign start of boot partition at the end of the bootloader space
|
|
`3073`
|
|
* assign end of boot partition
|
|
`+128M`
|
|
* change display units to cylinders
|
|
`u`
|
|
* create root partition
|
|
`n`
|
|
* make primary partition
|
|
`p`
|
|
* choose partition number
|
|
`2`
|
|
* assign start of boot partition at the end of the bootloader space (default cylinder)
|
|
`131`
|
|
* assign end of boot partition (default) by pressing ENTER
|
|
* change display units back to sectors
|
|
`u`
|
|
* show the partitions
|
|
`p`
|
|
* if you agree save and exit
|
|
`w`
|
|
* if you disagree delete a partition and start from that partition
|
|
`d`
|
|
* or exit without saving
|
|
`q`
|
|
* Make root filesystem
|
|
`mkfs.<ROOT_FILESYSTEM> /dev/mmcblk0p2`
|
|
* Make boot filesystem according to supported bootloader (only "_mkfs.vfat_")
|
|
`mkfs.<BOOTLOADER_FILESYSTEM> /dev/mmcblk0p1`
|
|
|
|
|
|
## BOOTLOADER
|
|
Minimum 3072 bytes free at the start of the drive and before the boot partition.
|
|
|
|
* VERSION 1: compile
|
|
```
|
|
git clone https://github.com/hardkernel/u-boot.git -b odroidc2-v2015.01
|
|
cd u-boot
|
|
make ARCH=arm64 CROSS_COMPILE=arm-none-eabi- odroidc2_defconfig
|
|
make -j4
|
|
cd boot
|
|
```
|
|
|
|
* VERSION 2: download and extract the binary
|
|
```
|
|
wget http://odroid.in/guides/ubuntu-lfs/boot.tar.gz # http://dn.odroid.com/S905/BootLoader/ODROID-C2/c2_boot_release_ubuntu.tar.gz
|
|
tar -zxvf boot.tar.xz
|
|
cd boot
|
|
```
|
|
|
|
* flash bootloader
|
|
```
|
|
chmod +x sd_fusing.sh
|
|
./sd_fusing.sh /dev/sdX
|
|
```
|
|
* notice the target is the device NOT any partition
|
|
* set resolution by editing file root/boot/boot.ini
|
|
* might want to comment-out the display-autodetect option
|
|
|
|
|
|
## BOOT PARTITION
|
|
Must be FAT32 and 64 MB minimum.
|
|
|
|
* cloning kernel repo to destination "odroidc2-kernel-folder"
|
|
`git clone --depth 1 --single-branch https://github.com/hardkernel/linux.git --branch odroidc2-v3.16.y odroidc2-kernel-folder`
|
|
* enter destination folder
|
|
`cd odroidc2-kernel-folder`
|
|
|
|
* OPTION 1: making kernel config
|
|
`make ARCH=arm64 CROSS_COMPILE=arm-none-eabi- odroidc2_defconfig`
|
|
|
|
* OPTION 2: making kernel config
|
|
```
|
|
export ARCH=arm64
|
|
export CROSS_COMPILE=arm-none-eabi-
|
|
make odroidc2_defconfig
|
|
```
|
|
|
|
* Refine configuration
|
|
`make menuconfig`
|
|
|
|
|
|
## COMPILING
|
|
* Compiling devicetree blobs to destination "INSTALL_DTBS_PATH=/mnt/boot/dtbs/meson64_odroidc2.dtb"
|
|
`make -j 4 ARCH=arm64 CROSS_COMPILE=arm-none-eabi- INSTALL_DTBS_PATH=/mnt/boot/dtbs/ dtbs`
|
|
* Compiling kernel to destination "INSTALL_PATH=/mnt/boot/Image"
|
|
`make -j 4 ARCH=arm64 CROSS_COMPILE=arm-none-eabi- INSTALL_PATH=/mnt/boot/ Image`
|
|
* Compiling the modules to destination "INSTALL_MOD_PATH=/mnt/"
|
|
`make -j 4 ARCH=arm64 CROSS_COMPILE=arm-none-eabi- INSTALL_MOD_PATH=/mnt/ modules_install`
|
|
* Compiling firmware to destination "INSTALL_FW_PATH=/mnt/lib/firmware/"
|
|
`make -j 4 ARCH=arm64 CROSS_COMPILE=arm-none-eabi- INSTALL_FW_PATH=/mnt/lib/firmware/ firmware_install`
|
|
* Compiling kernel C headers to destination "INSTALL_HDR_PATH=/mnt/usr/"
|
|
`make -j 4 ARCH=arm64 CROSS_COMPILE=arm-none-eabi- INSTALL_HDR_PATH=/mnt/usr/ headers_install`
|
|
|
|
|
|
## ROOT PARTITION
|
|
Can be the rest of the disk.
|
|
|
|
* Download CRUX image
|
|
`wget -c http://resources.crux-arm.nu/files/devel-test/3.3/crux-arm-rootfs-3.3-64b-RC2.tar.xz`
|